logo

한국어

게시판






조회 수 1351 추천 수 2 댓글 3
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
pmk 메뉴 둘러보다가 발견한 글 입니다.

------------------

The first keycap family produced by Signature Plastics’ previous company, Comptec Inc., was the SA family. These keys had a Spherical touch area and the same profile for All rows. 

A few years later the company began producing the SS family which also had a Spherical touch area but with a Sculptured profile i.e. each row had a different keycap angle giving the keyboard a curved look. Because of the limited number of shapes that were tooled, this tooling has been retired and is no longer available for production. 

In the mid 80’s an attempt was made to standardize keycaps to a ‘DIN Standard’. DIN stands for “Deutsches Institut für Normung”, meaning "German institute for standardization". This resulted in a new high profile family being produced, the DSS family, which was a DIN standard, Spherical touch, Sculptured key family. This family profile was never very popular and was quickly retired. A short time later the SA family was re-tooled to produce a sculptured look. The keycap family name didn’t change, but it was simply referred to as sculptured SA. 

The fourth family tooled was the low profile DSA family. These keys met the DIN standard, had a Spherical touch area, and the same low profile look for All rows. 

The DCS family followed shortly. These keys conformed to the DIN standard, had a Cylindrical touch surface, and a Sculptured profile. 

The latest keycap family, introduced by Signature Plastics in 2015, is the G20 family. These keys were designed with the gaming community in mind. They have a flat touch area that is wider than standard keycaps, resulting is a smaller gap and easier transition between adjacent keys. These keycaps have the same angle for all rows, similar to the DCS R2 profile.

---------------

- 지금의 SP 설립 이전 회사는 Comptec (1973년 설립 ~ 2001년 파산)
1. SA 패밀리가 처음으로 나옴. 다만 당시에는 DSA 패밀리처럼 전체 ROW 동일.
2. 몇년 후 두번째 SS 패밀리 나오면서 스텝 스컬쳐 도입. (단종)
3. 세번째는 80년대 중반에 DIN 표준에 맞춰 DSS 패밀리가 나왔지만 인기가 없어서 빠르게 단종.
80년대 중반에 SA 패밀리 키캡이 새로운 툴로 스텝 스컬처 방식이 도입되며 리뉴얼되지만 네이밍은 예전 그대로 유지.
4. 네번째로 나온게 DSA 패밀리.
5. DSA 직후 나온게 DCS 패밀리.
6. 2015년에 게이밍 커뮤니티 타겟의 G20 패밀리 출시.

List of Articles
번호 제목 글쓴이 날짜 조회 수
공지 2022년 7월 1일부로 회원 정리 안내 12 아침에™⇔N² 2022.06.09 3757
공지 키보드랩 이용규정 아침에™⇔N² 2021.11.22 3929
공지 [공제/공구] 가격/품목 등 정보 61 철혈마제 2015.03.09 36849
공지 키보드랩 사용주의사항. 11 duck0113 2014.06.03 40813
4308 키인식 문제 2 조약조약 2024.04.29 108
4307 밖에 비가 많이 오네요 3 이지섭 2023.11.05 112
4306 오테뮤 회축 사용해보고싶네요. 1 예현짱 2021.10.15 113
4305 見利思義見危授命님 스프링 잘받았습니다. file MadC 2019.07.05 114
4304 見利思義見危授命님 스프링 잘 받았습니다. file 감자팅 2019.07.02 128
4303 체리 스위치 청축 소량으로 판매처 아시는분 4 김태환 2019.02.14 128
4302 날씨가 많이 춥네요 2 아침에™⇔N² 2023.12.23 134
4301 추천 2 기므리 2018.06.02 134
4300 레벨별 아이콘 초반 컨셉이 '닭' 이라는걸 이제야 알았습니다. 2 file x66vx 2023.05.05 134
4299 atmega32u4 사용기판 key swap에 대해서 2 지율파파 2019.07.04 139
4298 건의합니다. 작성 글 보기에 출석글을 제외할 수 있을까요? file Limmy 2018.08.08 139
4297 planck 메스드랍 참여하신분 계신가요? 2 콩바구니 2018.06.14 140
4296 見利思義見危授命님 줄프링 이벤트 후기 file 천류 2019.07.02 145
4295 M3*OD4*5mm 인서트 너트 있으신 분 없나요? 2 Pelt 2018.06.09 146
4294 라떼님께 나눔받은 체리 갈축 후기 2 file 참마루 2023.07.05 146
4293 출석이 안됩니다.. ㅠㅠ file Clue 2018.07.19 151
4292 가입하고 처음 장터글 올려보려고하니 3 텐숀포스 2023.11.10 152
4291 계정찾기 이메일 미발송 2 잃어버린내계정 2022.09.27 153
4290 혹시 어베스트백신 같이 구매하실분계신가요 pjoonwoo99 2018.09.06 154
4289 봉사청년님의 책 나눔... 감사합니다. 4 file Time_is_ing 2023.04.11 154
목록
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 ... 216 Next
/ 216